Nativity Nite-Lite wood pattern

    Nativity Nite-Lite wood pattern

    Availability: Out Stock
    • Vendor:Christmas light show
    • Category: Lighted Christmas Wood Patterns, Nativity Scene Wood Patterns, Religious Themes Wood Patterns, Show All Christmas Wood Patterns
    $2.00
    Sold Out

     Dimensions:

    Joseph: 56-1/2" x 38"
    Baby jesus: 26-1/2" x 19"
    Mary: 40" x 24"

    Wood:
    One 4' x 8' sheet of 3/4" or 1/2" thick exterior grade plywood
    Two 2X2 x 48" long boards

    Hardware:
    Screws - Eighteen #6 x 1-1/4" long, flat head
    Stakes - Three 3/8" dia. x 18" long biberglass (3 - #YS18)
    Clamps - Six 3/8" w/screws (1 pack of #YSC2)
    Hinges - Two heavy duty
    Eyescrews - Four 5/16" I.D. (1 pack of #EYE3)
    Tie Down Stakes - Eight 3/16" dia. x 10" long steel rods (#TDS)

    Tools:
    Hand-held sabre saw with a smooth cutting, non-chipping blade, staple gun, electric drill, 3/32", 5/32" and 3/8" dia. drill bits

    Note:
    All three pieces are attached to a 3-1/2" x 73" board at the bottom, holding them all together, so that the lights are continuously fed through the project.

    Paints:White primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semi-gloss enamel:
    2506 Black exterior flat latex paint

    Sealer (optional): High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.

    Other Supplies:
    Lights - Four strands 100 count Clear miniature, 2-1/2" spacing between lights
    One strand 50 count Clear, miniature, 2-1/2" spacing between lights

    **Winfield does NOT carry the miniature lights. They should be available from your local big box store, Craft store or online thru Bronners.com.