3/8 in. - LED - Yellow - Rope Light
- The maximum run for this 120-volt LED rope light is 150 feet
- Now Power cords are included
This is 36" cut. Please do not buy this if you have no experience with rope light. It is not clearly marked where to cut. You have to figure that out. You can make your own power cords using spt wire. Simply trim the spt wire back about 1/2" and then twist the wire and solder it. Then push in an Ice pick into the rope light where the wire is to expand the plastic back from the wire. Then pull the ice pick out and insert your spt wire that you just soldered. Once both wires are in, test it and if it works, proceeed to add silicone around the exposed wire and then add shrink sleeve around it.
