Filters
Strobes
You may also like:
Curtain Strobe Light (3 to 4 Flashes per Second) x-3
(not water proof) Strobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof. This...
(not water proof) Strobe has a water resistant (treated with special coating) circuit ...
In Stock
$6.99
$6.00
Quick View
{"id":1846000320570,"title":"Curtain Strobe Light (3 to 4 Flashes per Second) x-3","handle":"curtain-strobe-light-3-to-4-flashes-per-second-x-3","description":"\u003cdiv\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e \u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"80%\" cellspacing=\"4\" cellpadding=\"4\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/christmaslightshow.com\/imagesdescriptions\/new_strobe.jpg\" alt=\"Curtain Strobe\" width=\"365\" height=\"352\" align=\"middle\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003c\/strong\u003e\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003eBuild Your Own Shooting Star CLICK HERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/PGZvoD2N0Hs\" width=\"420\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-08-22T02:45:54-05:00","created_at":"2018-08-22T02:45:54-05:00","vendor":"Christmas light show","type":"","tags":[],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":699,"compare_at_price_min":699,"compare_at_price_max":699,"compare_at_price_varies":false,"variants":[{"id":18122657169466,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKUx3","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Curtain Strobe Light (3 to 4 Flashes per Second) x-3","public_title":null,"options":["Default Title"],"price":600,"weight":91,"compare_at_price":699,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/xenon-Curtain-strobe-light-01.jpg?v=1535423085","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-01.jpg?v=1535423087"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/xenon-Curtain-strobe-light-01.jpg?v=1535423085","options":["Title"],"media":[{"alt":"Curtain Strobe Light (3 to 4 Flashes per Second) x-3 - Christmas light show","id":1525856731194,"position":1,"preview_image":{"aspect_ratio":1.042,"height":96,"width":100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/xenon-Curtain-strobe-light-01.jpg?v=1535423085"},"aspect_ratio":1.042,"height":96,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/xenon-Curtain-strobe-light-01.jpg?v=1535423085","width":100},{"alt":"Curtain Strobe Light (3 to 4 Flashes per Second) x-3 - Christmas light show","id":1525856763962,"position":2,"preview_image":{"aspect_ratio":1.037,"height":352,"width":365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-01.jpg?v=1535423087"},"aspect_ratio":1.037,"height":352,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-01.jpg?v=1535423087","width":365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e \u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"80%\" cellspacing=\"4\" cellpadding=\"4\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/christmaslightshow.com\/imagesdescriptions\/new_strobe.jpg\" alt=\"Curtain Strobe\" width=\"365\" height=\"352\" align=\"middle\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003c\/strong\u003e\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003eBuild Your Own Shooting Star CLICK HERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/PGZvoD2N0Hs\" width=\"420\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
You may also like:
LED Curtain strobe lights 3 to 4 flashes per second (LED-3)
LED CURTAIN STROBE (not water proof) Strobe has a water resistant (treated with special coating) circuit board, but this does not make them...
LED CURTAIN STROBE (not water proof) Strobe has a water resistant (treated with spe...
Out Stock
Sold Out
Quick View
{"id":1846060515386,"title":"LED Curtain strobe lights 3 to 4 flashes per second (LED-3)","handle":"led-curtain-strobe-lights-3-to-4-flashes-per-second-led-3","description":"\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e LED CURTAIN STROBE\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second. These LED strobes are equally as bright as our Xenon strobes \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable width=\"80%\" align=\"center\" border=\"0\" cellspacing=\"4\" cellpadding=\"4\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003c\/strong\u003e\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003e\u003cstrong\u003eBuild Your Own Shooting Star CLICK HERE!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 align=\"center\"\u003e \u003c\/h3\u003e\n\u003cdiv\u003e\u003ciframe width=\"420\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/PGZvoD2N0Hs\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSee Detail images below.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-02-15T18:34:40-06:00","created_at":"2018-08-22T03:40:08-05:00","vendor":"Christmas light show","type":"","tags":[],"price":600,"price_min":600,"price_max":600,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18123941642298,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKUled3","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"LED Curtain strobe lights 3 to 4 flashes per second (LED-3)","public_title":null,"options":["Default Title"],"price":600,"weight":91,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med.jpg?v=1535423324","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1.jpg?v=1535423327"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med.jpg?v=1535423324","options":["Title"],"media":[{"alt":"LED Curtain strobe lights 3 to 4 flashes per second (LED-3) - Christmas light show","id":1526020931642,"position":1,"preview_image":{"aspect_ratio":1.2,"height":250,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med.jpg?v=1535423324"},"aspect_ratio":1.2,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med.jpg?v=1535423324","width":300},{"alt":"LED Curtain strobe lights 3 to 4 flashes per second (LED-3) - Christmas light show","id":1526020997178,"position":2,"preview_image":{"aspect_ratio":1.2,"height":500,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1.jpg?v=1535423327"},"aspect_ratio":1.2,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1.jpg?v=1535423327","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e LED CURTAIN STROBE\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second. These LED strobes are equally as bright as our Xenon strobes \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable width=\"80%\" align=\"center\" border=\"0\" cellspacing=\"4\" cellpadding=\"4\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003c\/strong\u003e\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003e\u003cstrong\u003eBuild Your Own Shooting Star CLICK HERE!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 align=\"center\"\u003e \u003c\/h3\u003e\n\u003cdiv\u003e\u003ciframe width=\"420\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/PGZvoD2N0Hs\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSee Detail images below.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
You may also like:
LED Curtain strobe lights 1 flash per second (LED-1)
LED CURTAIN STROBE (not water proof) Strobe has a water resistant (treated with special coating) circuit board, but this does not make them...
LED CURTAIN STROBE (not water proof) Strobe has a water resistant (treated with spe...
Out Stock
Sold Out
Quick View
{"id":1846061006906,"title":"LED Curtain strobe lights 1 flash per second (LED-1)","handle":"led-curtain-strobe-lights-1-flash-per-second-led-1","description":"\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e LED CURTAIN STROBE\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 1 flash per second. These LED strobes are equally as bright as our Xenon strobes \u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003eBuild Your Own Shooting Star CLICK HERE! \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\n\u003cdiv align=\"center\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003cp\u003eSee Detail images below.\u003c\/p\u003e","published_at":"2018-08-22T03:40:21-05:00","created_at":"2018-08-22T03:40:21-05:00","vendor":"Christmas light show","type":"","tags":[],"price":400,"price_min":400,"price_max":400,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18123950719034,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKUled1","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"LED Curtain strobe lights 1 flash per second (LED-1)","public_title":null,"options":["Default Title"],"price":400,"weight":91,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med1.jpg?v=1535423319","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe11.jpg?v=1535423320"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med1.jpg?v=1535423319","options":["Title"],"media":[{"alt":"LED Curtain strobe lights 1 flash per second (LED-1) - Christmas light show","id":1526021783610,"position":1,"preview_image":{"aspect_ratio":1.2,"height":250,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med1.jpg?v=1535423319"},"aspect_ratio":1.2,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe1_med1.jpg?v=1535423319","width":300},{"alt":"LED Curtain strobe lights 1 flash per second (LED-1) - Christmas light show","id":1526021816378,"position":2,"preview_image":{"aspect_ratio":1.2,"height":500,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe11.jpg?v=1535423320"},"aspect_ratio":1.2,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/led_strobe11.jpg?v=1535423320","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e LED CURTAIN STROBE\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 1 flash per second. These LED strobes are equally as bright as our Xenon strobes \u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003eBuild Your Own Shooting Star CLICK HERE! \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\n\u003cdiv align=\"center\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003cp\u003eSee Detail images below.\u003c\/p\u003e"}
You may also like:
Curtain Strobe Light Blue (3 to 4 Flashes per Second) xb-3
(not water proof) Strobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof. This eight...
(not water proof) Strobe has a water resistant (treated with special coating) circuit ...
Out Stock
Sold Out
Quick View
{"id":1846068084794,"title":"Curtain Strobe Light Blue (3 to 4 Flashes per Second) xb-3","handle":"curtain-strobe-light-blue-3-to-4-flashes-per-second-xb-3","description":"\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"color: #006400; font-weight: bold; font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"80%\" cellspacing=\"4\" cellpadding=\"4\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/christmaslightshow.com\/xcart5\/\/imagesdescriptions\/new_strobe.jpg\" alt=\"Curtain Strobe\" width=\"365\" height=\"352\" align=\"middle\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003e\u003cstrong\u003eBuild Your Own Shooting Star CLICK HERE!\u003cbr\u003e \u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: -webkit-auto;\" align=\"center\"\u003e \u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","published_at":"2018-08-22T03:44:21-05:00","created_at":"2018-08-22T03:44:21-05:00","vendor":"Christmas light show","type":"","tags":[],"price":200,"price_min":200,"price_max":200,"available":false,"price_varies":false,"compare_at_price":500,"compare_at_price_min":500,"compare_at_price_max":500,"compare_at_price_varies":false,"variants":[{"id":18124118523962,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKUxb3","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Curtain Strobe Light Blue (3 to 4 Flashes per Second) xb-3","public_title":null,"options":["Default Title"],"price":200,"weight":136,"compare_at_price":500,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/strobe_blue.jpg?v=1535423089","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-012.jpg?v=1535423091"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/strobe_blue.jpg?v=1535423089","options":["Title"],"media":[{"alt":"Curtain Strobe Light Blue (3 to 4 Flashes per Second) xb-3 - Christmas light show","id":1526037741626,"position":1,"preview_image":{"aspect_ratio":0.477,"height":524,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/strobe_blue.jpg?v=1535423089"},"aspect_ratio":0.477,"height":524,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/strobe_blue.jpg?v=1535423089","width":250},{"alt":"Curtain Strobe Light Blue (3 to 4 Flashes per Second) xb-3 - Christmas light show","id":1526037774394,"position":2,"preview_image":{"aspect_ratio":1.037,"height":352,"width":365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-012.jpg?v=1535423091"},"aspect_ratio":1.037,"height":352,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/new_strobe-012.jpg?v=1535423091","width":365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"71%\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"color: #006400; font-weight: bold; font-size: 16px;\"\u003eStrobe has a water resistant (treated with special coating) circuit board, but this does not make them Condensation proof.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\" width=\"80%\" cellspacing=\"4\" cellpadding=\"4\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/christmaslightshow.com\/xcart5\/\/imagesdescriptions\/new_strobe.jpg\" alt=\"Curtain Strobe\" width=\"365\" height=\"352\" align=\"middle\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eThe circuit boards are now dipped to repell moisture. \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cstrong\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/christmaslightshow.com\/doityourself\/index5.shtml\"\u003e\u003cstrong\u003eBuild Your Own Shooting Star CLICK HERE!\u003cbr\u003e \u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: -webkit-auto;\" align=\"center\"\u003e \u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003eNow you can easily hang strobes along gutter lines, fence lines by using C9 light string cords.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e"}
You may also like:
LED Curtain strobe light (1 Flash Per 3 Seconds) Led 1/3
o Flashes 1 flash every 3 seconds. Water Resistant Strobes (not water proof) This is a slower strobe that flashes 1 flash 3 per...
o Flashes 1 flash every 3 seconds. Water Resistant Strobes (not water proof) This is a...
In Stock
$2.00
Quick View
{"id":1846136569914,"title":"LED Curtain strobe light (1 Flash Per 3 Seconds) Led 1\/3","handle":"led-curtain-strobe-light-1-flash-per-3-seconds-led-1-3","description":"\u003cdiv\u003eo\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"100%\"\u003e\n\u003ch1 align=\"center\"\u003e\u003cspan style=\"text-align: -webkit-left;\"\u003eFlashes 1 flash every 3 seconds.\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch1 align=\"center\"\u003eWater Resistant Strobes\u003c\/h1\u003e\n\u003ch3 style=\"color: red;\"\u003e \u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cspan class=\"style1\" style=\"color: #006400;\"\u003eThis is a slower strobe that flashes 1 flash 3 per seconds. The majority of decorators use the 3 to 4 flashes per second. This strobe is best used for in wreaths or large Christmas trees to give a slower sparkle look. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cspan class=\"style1\" style=\"color: #006400;\"\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. This strobe has a flash rate of 1 flash per second.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ctable width=\"100%\" border=\"0\" cellspacing=\"4\" cellpadding=\"4\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-08-22T04:30:24-05:00","created_at":"2018-08-22T04:30:24-05:00","vendor":"Christmas light show","type":"","tags":[],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18125766492218,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKULed1\/3","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"LED Curtain strobe light (1 Flash Per 3 Seconds) Led 1\/3","public_title":null,"options":["Default Title"],"price":200,"weight":91,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/p-1181.jpg?v=1535423314","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/d-54-42-083.jpg?v=1535423317"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/p-1181.jpg?v=1535423314","options":["Title"],"media":[{"alt":"LED Curtain strobe light (1 Flash Per 3 Seconds) Led 1\/3 - Christmas light show","id":1526232907834,"position":1,"preview_image":{"aspect_ratio":1.2,"height":60,"width":72,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/p-1181.jpg?v=1535423314"},"aspect_ratio":1.2,"height":60,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/p-1181.jpg?v=1535423314","width":72},{"alt":"LED Curtain strobe light (1 Flash Per 3 Seconds) Led 1\/3 - Christmas light show","id":1526232940602,"position":2,"preview_image":{"aspect_ratio":1.037,"height":352,"width":365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/d-54-42-083.jpg?v=1535423317"},"aspect_ratio":1.037,"height":352,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/d-54-42-083.jpg?v=1535423317","width":365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eo\n\u003ctable width=\"100%\" align=\"center\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"100%\"\u003e\n\u003ch1 align=\"center\"\u003e\u003cspan style=\"text-align: -webkit-left;\"\u003eFlashes 1 flash every 3 seconds.\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch1 align=\"center\"\u003eWater Resistant Strobes\u003c\/h1\u003e\n\u003ch3 style=\"color: red;\"\u003e \u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd width=\"29%\"\u003e\u003cspan class=\"style5\"\u003e(not water proof)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cspan class=\"style1\" style=\"color: #006400;\"\u003eThis is a slower strobe that flashes 1 flash 3 per seconds. The majority of decorators use the 3 to 4 flashes per second. This strobe is best used for in wreaths or large Christmas trees to give a slower sparkle look. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cspan class=\"style1\" style=\"color: #006400;\"\u003eThis eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. This strobe has a flash rate of 1 flash per second.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ctable width=\"100%\" border=\"0\" cellspacing=\"4\" cellpadding=\"4\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv align=\"center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes come with a C9 socket built on the end, this makes installation much easier and faster, no more messy cords.\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003eEasier to hang strobes in trees. By using C9 light stringing's, you can hand strobe easier and space the strobes as far apart as you desire. No more worrying about water running down cord and seeping inside the strobe. Backside is sealed and screw holes have silicone.\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003eWater resistant. The lens cover contains an oil ring and screw wholes at the bottom have silicone placed in the screw holes. Although these strobes are not made for out side, they will not get water inside. These strobes were submerged (extreme test) under water for several days and only a little moisture got inside. Since new strobes are so air tight they should help prevent build up of condensation, but have not been tested yet. We have tested them in a freezer for days and they have not accumulated any signs of moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"style1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan class=\"style3\"\u003eWhen using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTips for Placing strobes:\u003c\/p\u003e\n\u003cp\u003eOn the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
You may also like:
7.5" C9/C7 Metal Outdoor Stakes for STROBES
7.5" Metal C9/C7 Outdoor Stakes C9/C7 Stakes are designed to hold C9/C7 bulb sockets. Each pack contains 25 pieces. 7.5" metal stakes for use with...
7.5" Metal C9/C7 Outdoor Stakes C9/C7 Stakes are designed to hold C9/C7 bulb sockets. Each pack c...
Out Stock
Sold Out
Quick View
{"id":1846003007546,"title":"7.5\" C9\/C7 Metal Outdoor Stakes for STROBES","handle":"7-5-c9-c7-metal-outdoor-stakes-for-strobes","description":"\u003cp\u003e7.5\" Metal C9\/C7 Outdoor Stakes\u003c\/p\u003e\n\u003cp\u003eC9\/C7 Stakes are designed to hold C9\/C7 bulb sockets. Each pack contains 25 pieces. 7.5\" metal stakes for use with C9 strobes or C9 lights\u003c\/p\u003e","published_at":"2018-08-22T02:48:40-05:00","created_at":"2018-08-22T02:48:40-05:00","vendor":"Christmas light show","type":"","tags":[],"price":200,"price_min":200,"price_max":200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18122747871290,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKU87","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"7.5\" C9\/C7 Metal Outdoor Stakes for STROBES","public_title":null,"options":["Default Title"],"price":200,"weight":454,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-7.jpg?v=1535423232","\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-71.jpg?v=1535423233"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-7.jpg?v=1535423232","options":["Title"],"media":[{"alt":"7.5\" C9\/C7 Metal Outdoor Stakes for STROBES - Christmas light show","id":1525863678010,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-7.jpg?v=1535423232"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-7.jpg?v=1535423232","width":600},{"alt":"7.5\" C9\/C7 Metal Outdoor Stakes for STROBES - Christmas light show","id":1525863710778,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-71.jpg?v=1535423233"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/grnd_metal_stake-71.jpg?v=1535423233","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e7.5\" Metal C9\/C7 Outdoor Stakes\u003c\/p\u003e\n\u003cp\u003eC9\/C7 Stakes are designed to hold C9\/C7 bulb sockets. Each pack contains 25 pieces. 7.5\" metal stakes for use with C9 strobes or C9 lights\u003c\/p\u003e"}
You may also like:
30 watt Mini Strobe Light
Mini Strobe Light Portable mini strobe light Power: 30W Flash rate: 1 to 10 flashes per second Ajustable flash rate
Mini Strobe Light Portable mini strobe light Power: 30W Flash rate: 1 to 10 flashes per secon...
Out Stock
Sold Out
Quick View
{"id":1846072410170,"title":"30 watt Mini Strobe Light","handle":"30-watt-strobe-light","description":"\u003ch1\u003e\u003cspan style=\"color: #424242; font-family: arial, 宋体, 'Lucida Grande', tahoma, sans-serif, verdana; line-height: 24px;\"\u003eMini Strobe Light\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv id=\"contentText\" style=\"border-image: initial; outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; color: #424242; font-family: arial, 宋体, 'Lucida Grande', tahoma, sans-serif, verdana; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003e\n\u003ctable style=\"outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; border-collapse: collapse; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; font-size: inherit; table-layout: fixed; width: 720px; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; vertical-align: top; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003ePortable mini strobe light\u003cbr\u003e Power: 30W\u003cbr\u003e Flash rate: 1 to 10 flashes per second\u003cbr\u003e Ajustable flash rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 2px; top: -15.0052px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-08-22T03:47:24-05:00","created_at":"2018-08-22T03:47:24-05:00","vendor":"Christmas light show","type":"","tags":[],"price":400,"price_min":400,"price_max":400,"available":false,"price_varies":false,"compare_at_price":1945,"compare_at_price_min":1945,"compare_at_price_max":1945,"compare_at_price_varies":false,"variants":[{"id":18124233572410,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKU835","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"30 watt Mini Strobe Light","public_title":null,"options":["Default Title"],"price":400,"weight":454,"compare_at_price":1945,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/30-watt-strobe.jpg?v=1535423009"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/30-watt-strobe.jpg?v=1535423009","options":["Title"],"media":[{"alt":"30 watt Strobe Light - Christmas light show","id":1526049407034,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/30-watt-strobe.jpg?v=1535423009"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/30-watt-strobe.jpg?v=1535423009","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e\u003cspan style=\"color: #424242; font-family: arial, 宋体, 'Lucida Grande', tahoma, sans-serif, verdana; line-height: 24px;\"\u003eMini Strobe Light\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv id=\"contentText\" style=\"border-image: initial; outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; color: #424242; font-family: arial, 宋体, 'Lucida Grande', tahoma, sans-serif, verdana; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003e\n\u003ctable style=\"outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; border-collapse: collapse; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; font-size: inherit; table-layout: fixed; width: 720px; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"outline-width: 0px; outline-style: initial; outline-color: initial; clear: none; vertical-align: top; padding: 0px; margin: 0px; border: 0px initial initial;\"\u003ePortable mini strobe light\u003cbr\u003e Power: 30W\u003cbr\u003e Flash rate: 1 to 10 flashes per second\u003cbr\u003e Ajustable flash rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 2px; top: -15.0052px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
You may also like:
80 Watt Strobe Light
80 Watt Strobe Light This 80 watt High-powered strobe lamp is great for any Christmas Light Show! 1) All black metal housing with hanging bracket 2)...
80 Watt Strobe Light This 80 watt High-powered strobe lamp is great for any Christmas Light Show...
Out Stock
Sold Out
Quick View
{"id":1846010544186,"title":"80 Watt Strobe Light","handle":"80-watt-strobe-light","description":"\u003ch1 style=\"color: #006400;\" align=\"center\"\u003e80 Watt Strobe Light\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003ch1 align=\"center\"\u003e\u003cspan style=\"color: #000000; font-size: 10pt;\"\u003eThis 80 watt High-powered strobe lamp is great for any Christmas Light Show!\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1) All black metal housing with hanging bracket\u003c\/div\u003e\n\u003cdiv\u003e2) Output color: Bright flash\u003c\/div\u003e\n\u003cdiv\u003e3) With variable flash speed and intensity adjustment\u003c\/div\u003e\n\u003cdiv\u003e4) Construction: Portable, adjustable mounting bracket\u003c\/div\u003e\n\u003cdiv\u003e5) Input: 120V \/ 220V \/ 240V, 50Hz \/ 60Hz 5) Lamp: 80W bulb x 1 supplied\u003c\/div\u003e\n\u003cdiv\u003e6) Dimensions: 32.5(L) x 18.75(W) x 21.75(H)cm\u003c\/div\u003e","published_at":"2018-08-22T02:58:31-05:00","created_at":"2018-08-22T02:58:31-05:00","vendor":"Christmas light show","type":"","tags":[],"price":1500,"price_min":1500,"price_max":1500,"available":false,"price_varies":false,"compare_at_price":5995,"compare_at_price_min":5995,"compare_at_price_max":5995,"compare_at_price_varies":false,"variants":[{"id":18122901979194,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKU237","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"80 Watt Strobe Light","public_title":null,"options":["Default Title"],"price":1500,"weight":3175,"compare_at_price":5995,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/80-watt-strobe-lights.jpg?v=1535423293"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/80-watt-strobe-lights.jpg?v=1535423293","options":["Title"],"media":[{"alt":"80 Watt Strobe Light - Christmas light show","id":1525882781754,"position":1,"preview_image":{"aspect_ratio":0.94,"height":316,"width":297,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/80-watt-strobe-lights.jpg?v=1535423293"},"aspect_ratio":0.94,"height":316,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/0854\/3802\/products\/80-watt-strobe-lights.jpg?v=1535423293","width":297}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 style=\"color: #006400;\" align=\"center\"\u003e80 Watt Strobe Light\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003ch1 align=\"center\"\u003e\u003cspan style=\"color: #000000; font-size: 10pt;\"\u003eThis 80 watt High-powered strobe lamp is great for any Christmas Light Show!\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1) All black metal housing with hanging bracket\u003c\/div\u003e\n\u003cdiv\u003e2) Output color: Bright flash\u003c\/div\u003e\n\u003cdiv\u003e3) With variable flash speed and intensity adjustment\u003c\/div\u003e\n\u003cdiv\u003e4) Construction: Portable, adjustable mounting bracket\u003c\/div\u003e\n\u003cdiv\u003e5) Input: 120V \/ 220V \/ 240V, 50Hz \/ 60Hz 5) Lamp: 80W bulb x 1 supplied\u003c\/div\u003e\n\u003cdiv\u003e6) Dimensions: 32.5(L) x 18.75(W) x 21.75(H)cm\u003c\/div\u003e"}
